Description

The CAME AXO 24v Swing Gate Automation Kit is a premier, industrial-grade above-ground linear ram system designed for heavy or high-prestige residential gates and expansive apartment block entrances.

While the ATI series relies on a classic boxy chassis layout, the AXO series is built with supporting aluminum half-castings that house a massive, ultra-quiet epicyclical reduction worm-screw drive. It is designed specifically to move physically wide or heavily paneled timber/metal leaves with seamless speed and exceptional leverage.

The Two Kit Variants

Depending on the physical clearance and span of your gates, the AXO 24V kit is deployed in two specific stroke lengths:

1. The 3-Meter Leaf Version (AXO AX3024 / Kit AXO-P324): Optimized for gates up to 3.0 meters wide or up to 800 kg per leaf (dropping to 500 kg at max 3m width).

2. The 5-Meter Leaf Version (AXO AX5024 / Kit AXO-P524): A long-stroke, high-leverage operator engineered for expansive gates up to 5.0 meters wide or up to 1000 kg per leaf (dropping to 400 kg at max 5m width).

Standard Kit Components

A premium dual-leaf trade kit typically ships with:

• 2 x AXO 24V Irreversible Rams: Featuring fully enclosed worm-screws and integrated electronic encoders.

• 1 x CAME Multi-Function Control Panel: Modern variants utilize the ZLX24 smart controller featuring an intuitive LCD programming interface and Adaptive Speed & Torque Technology (AST).

• 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio module.

• 2 x CAME Rolling Code Transmitters: High-security handheld remotes.

• 1 x Pair of DIR-10 Safety Photocells: Surface-mounted infrared safety beams.

• 1 x TOP-A433N Tuned Antenna: To ensure strong radio coverage.

Technical Specifications

Feature	Specification (3m / 5m Models)
Motor Power Supply	24 V DC
Max Torque / Thrust	500 N to 4500 N (Highly adjustable)
Maneuvering Time (90°)	Configurable / Speed Adjustable
Duty Cycle Profile	Heavy-Duty Service / Continuous Use
Ingress Protection	IP44
Connection Scheme	3-Core simplified cable (combining motor and encoder signals)

Key Mechanical Advantages

• Fully Shielded Drive System: The entire length of the rotating steel worm-screw sits behind a structural, protective lower cover. This stops road grit, leaves, salt, and freezing snow from binding the mechanics—a major issue for open-screw designs.

• Built-in Adjustable Travel Stops: Features integrated mechanical limit stops directly along the internal shaft travel track. This allows the installer to cleanly memorize start and slowdown points without needing ugly steel stop blocks anchored into the middle of the driveway.

• Encoder Path Management: Driven by an onboard optical encoder, the control board monitors the gate’s movement down to the millimeter, delivering smooth deceleration ramps near travel limits and intelligent obstacle reversal.

CAME Axo – Pair Kit

CAME Axo – Single Kit