Description

The CAME Fast 70 Automation Kit (catalogued under prominent part numbers like FA7024CB for the master unit and FA7024 for the slave motor) is an articulated-arm electromechanical operator series designed for swing gates. It is engineered for residential entrances or medium-density apartment blocks with wide brick or stone pillars where a standard linear ram would bind against the post.

The system relies on a heavy-duty articulated arm to cleanly reach around wide pillars, driving gate leaves up to 2.3 meters in length or up to 300 kg in weight per leaf.

Core Engineering & Mechanical Design

• Deep Pillar Problem Solver: Engineered to handle structural clearance issues, the Fast 70 can comfortably mount to wide pillars with an internal hinge-to-wall offset (C-max dimension) reaching up to 200 mm, allowing smooth leverage without cutting niches into brickwork.

• Dual-Voltage Configurations:

  • 24V DC Models (FA7024CB / FA7024): Built for continuous intensive use (up to 65 cycles per hour). Runs cool under constant loads and integrates with optional battery backup kits (LB180) to keep perimeters functional during blackouts.

  • 230V AC Models (FA70230CB / FA70230): High-torque single-phase motors ideal for standard residential properties requiring a 30% duty cycle rating.

• Integrated Intelligent Command Hub: The master motor housing (FA7024CB) contains the system’s control board, eliminating the need to wire an external wall-mounted box. The 24V board uses absolute encoder tracking to provide millimetric travel positioning, active anti-crush obstacle sensing, and customizable end-of-travel deceleration zones.

• Safe Trap-Free Articulation: Built within a weather-resistant IP54-rated housing, the heavy-duty articulated transmission arms fold neatly into a compact footprint to drastically reduce trapping risks between the arm and surrounding boundary structures.

Technical Specifications Matrix

Feature/Model Specification	Fast 70 24V Variant (FA7024CB)	Fast 70 230V Variant (FA70230CB)
Max Leaf Length / Weight Limits	2.3m @ 200 kg | 1.5m @ 250 kg | 1.0m @ 300 kg	2.3m @ 200 kg | 1.5m @ 250 kg | 1.0m @ 300 kg
Power Input / Motor Drive	230V AC (50/60 Hz) / 24V DC	230V AC (50/60 Hz) / 230V AC
90° Opening Velocity	13 to 15 Seconds (Fully Adjustable)	18 Seconds
Maximum Torque Output	180 Nm	300 Nm (High-Inertia Torque)
Duty Cycle Profile	Intensive Use (Continuous / 65 Cycles/Hr)	30% Residential Use
Maximum Opening Angle	110°	110°
Ingress Protection Rating	IP54 Weatherproof	IP54 Weatherproof

Standard Kit Box Contents

1. 1 x Master 24V/230V Motor Assembly: Contains the internal digital command board, mechanical limit switches, and an ergonomic manual key-release layout.

2. 1 x Slave 24V/230V Motor Assembly: High-torque secondary gearmotor unit.

3. 2 x Heavy-Duty Articulated Transmission Arms: Solid steel arm linkages designed to transfer motor torque seamlessly around deep pillar profiles.

4. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver card.

5. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for clear driveway boundary defence.

6. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Carbon-fibre textured 4-button rolling code remotes running on a secure 433.92 MHz link to prevent signal cloning.

7. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass structural masonry interference and maximize remote operational range.

CAME Fast70 – Pair Kit

CAME Fast70 – Single Kit