Description

The CAME Frog AE 24v Swing Gate Kit (often indexed under package codes like 8K01MI-0515 or 8K01MI-0516) is a commercial-grade, below-ground dual-leaf electric gate automation kit.

By utilizing 24V DC encoder motors (FROG-A24E) alongside a modern digital control ecosystem, this kit represents CAME’s benchmark underground solution for intensive-use residential properties, luxury developments, and high-traffic commercial entrances where visible automation would spoil the architecture.

Core Engineering & Safety Features

• Intensive / Continuous Duty Cycles: Unlike traditional 230V systems that can suffer from thermal cut out under heavy, repetitive usage, the 24V DC motor architecture runs exceptionally cool. It handles demanding, non-stop operation seamlessly.

• Physical Optical Encoder Safety: The “E” designation signifies built-in electronic path encoders. The onboard computer monitors the rotation of each motor down to the millimeter. If a gate leaf touches a vehicle, pedestrian, or pet, the system instantly detects the spike in structural resistance and safely reverses the gate’s direction.

• Completely Invisible Profile: Installed completely flush inside sub-driveway foundation boxes, the mechanical drive linkage acts directly as the bottom pivot hinge for the gate. The structural face of your custom timber or wrought-iron gates remains entirely clean.

• Internal Mechanical Travel Stops: Built-in adjustable physical stops inside the motor casing mean the installer can mechanically set the open and close limits. This removes the need for tripping hazards or ugly metal stop blocks anchored into the center of your driveway.

Technical Specifications

Feature	Specification
Motor Models	FROG-A24E (24V DC with Encoder)
Max Leaf Length	Up to 3.5 Meters
Max Leaf Weight	Up to 400 kg at max 3.5m length (Up to 800 kg at reduced widths)
90° Opening Speed	Fully Adjustable (Configurable down to ~14-16 seconds)
Ingress Protection	IP67 (Fully waterproof, dust-tight, and submersible motor core)
Control Board Included	ZLX24S / ZLX24SA Digital Smart Panel
Battery Backup	Supported (Via optional auxiliary plug-in card and batteries)

Standard Kit Box Contents

1. 2 x FROG-A24E 24V Motors: Complete with pre-wired encoder connections.

2. 2 x FROG Foundation Boxes: High-durability, anti-corrosive hot-dip steel casings (Stainless steel available in premium trade variants).

3. 2 x A4364 Manual Release Links: Robust tubular-type 10 lever-key mechanical overrides for use during power outages.

4. 1 x ZLX24 Multifunction Control Panel: Features a graphical text or 7-segment programming display, Adaptive Speed & Torque Technology (AST), and built-in slots for smartphone gateways.

5. 1 x AF43S Frequency Card & Tuned Antenna: 433.92 MHz secure radio receiver setup.

6. 2 x CAME Rolling Code Transmitters: High-security dual-channel remote control key fobs.

7. 1 x Pair of DIR10 or BUS Photocells: Synchronized surface-mounted safety beams.

CAME FrogAE – Pair Kit

CAME FrogAE – Single Kit