Description

The CAME BXV600GF Rapid Automation Kit (indexed under core individual chassis code 801MS-0190 or motor reference BXV06AGF) is a high-speed, intensive-use sliding gate system.

The “GF” designation represents CAME’s specialized rapid-ratio gear engineering. While standard 600kg residential motors operate at a standard crawl of 11 to 12 meters per minute, the BXV Rapid shifts into high gear—driving leaves up to a blistering 20 meters per minute. This setup is a prime choice for busy apartment complex entryways, corporate car parks, and high-security domestic settings where minimizing street-level vehicle queuing and preventing trailing “tailgaters” is absolutely paramount.

Core Engineering & Mechanical Design

• Rapid-Drive High-Speed Gearbox: Safely moving a 600kg gate leaf at 20 m/min requires precise momentum control. The internal 24V electromechanical drive relies on a standard Module 4 pinion paired with active encoder acceleration and deceleration mapping. This ensures that the gate ramps up to its top speed and glides to a stop smoothly, preventing sudden structural inertia from shearing teeth off the rack.

• The Tall “Large Housing” Casing: The motor chassis (finished in architectural RAL 7024 charcoal gray) features an elevated top cover. This extended height is custom-engineered to safely internalize auxiliary hardware. It can directly house 2 x 12V 5.0Ah emergency backup batteries, providing over 60 full continuous operational cycles during a total mains blackout.

• Encoder-Monitored Safety & Force Control: Operating at rapid speeds demands responsive safety layers. The internal optical encoder continuously tracks the gate’s location down to the millimeter. If the gate meets a minor increase in physical resistance (caused by an obstructing vehicle, pedestrian, or strong wind pressure), it immediately triggers an electronic cutoff and reverses travel.

• CAME RIO Wireless Safety Hub Ready: The onboard control board supports direct plug-and-play integration for the RIO Total Wireless Safety system. Installers can easily mount wireless safety photocells and edges without cutting, sawing, or digging trenches across the driveway floor.

Technical Specifications

Feature	Specification
Motor Unit Model	BXV06AGF (Rapid Version with Tall Cover)
Mains Input / Motor Drive	230V AC (50/60 Hz) / 24V DC High-Speed Motor
Maximum Leaf Weight	600 kg
Maximum Leaf Travel Length	18 Meters
Operational Travel Speed	20 Meters per Minute
Duty Cycle Profile	Heavy-Duty / Continuous Intensive Use
Thrust Output / Ingress	330 N / IP54 (Dust and splash weatherproof casing)
User Memory Slots	Onboard storage for up to 250 unique user remotes

Standard Kit Box Contents

1. 1 x BXV06AGF 24V Rapid Motor Assembly: Fitted with an electronic display controller, encoder tracking, and integrated mechanical limit switches.

2. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

3. 1 x Pair of DIR20 Safety Photocells: Standard hardwired 10-meter range synchronized infrared safety beams.

4. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Sleek, carbon-fibre textured 4-button rolling code remotes operating on a highly secure 433.92 MHz frequency link.

5. 1 x TOP-A433N Tuned Antenna: To maximize remote range and clear ambient radio interference.