Unlike the ATI range, which features a classic rectangular profile, the AXO series is constructed with structural aluminum half-castings housing an advanced, fully enclosed epicyclical reduction worm-screw drive. The 230V variant is engineered to provide massive physical leverage for heavy gates without requiring an encoder module for standard operation.

The Two Kit Variants

Depending on the width and structural mass of your gate leaves, the AXO 230V kit is supplied in two distinct stroke lengths:

1. The 3-Meter Leaf Version (AXO AX30230 / Kit AXO-P323): Optimized for gate leaves up to 3.0 meters wide or up to 800 kg per leaf (dropping to 500 kg at max 3m width). It delivers a fixed 90° opening speed of approximately 20 seconds.

2. The 5-Meter Leaf Version (AXO AX50230 / Kit AXO-P523): A long-stroke, high-leverage operator engineered for massive gates up to 5.0 meters wide or up to 1000 kg per leaf (dropping to 400 kg at max 5m width). It features an opening speed of approximately 40 seconds.

Standard Kit Components

A premium dual-leaf trade kit typically includes:

• 2 x AXO 230V Irreversible Rams: Built with a fully enclosed worm-screw and integrated internal mechanical travel stops.

• 1 x CAME Multi-Function Control Panel: Modern iterations feature the advanced ZLX230S digital control board, enabling electronic digital torque regulation.

• 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

• 2 x CAME Rolling Code Transmitters: High-security handheld key fobs.

• 1 x Pair of DIR-10 Safety Photocells: Surface-mounted infrared safety beams.

• 1 x TOP-A433N Tuned Antenna: To optimize radio signal reception range.

Technical Specifications

Key Architectural & Mechanical Advantages

• Shielded Worm-Screw Drive: The rotating steel worm-screw is entirely enclosed within the lower chassis. This prevents road grit, fallen leaves, salt spray, and ice from fouling the mechanics—a major benefit over open-screw alternative rams.

• No Central Gate Stops Needed: Built-in mechanical limit switches are positioned along the internal shaft track. Installers can precisely set the open and close limits directly on the motor, removing the need for physical metal stop blocks in the middle of the driveway.

• Irreversible Self-Locking System: The planetary gear reduction naturally locks the gate rigid when the motor stops, providing structural resistance against forced manual entry without needing an immediate electric lock on smaller gate spans.

CAME Axo – Pair Kit

CAME Axo – Single Kit

By pairing robust 230V AC motors (FROG-AE) with built-in electronic encoders, this kit delivers the massive crushing and driving torque of mains-powered motors alongside the sophisticated safety features typically reserved for low-voltage setups. It is a favorite choice for large, heavy residential gates or structural estate entrances where visible automation would spoil the clean look of the architecture.

Core Engineering & Safety Features

• Mains Power with Encoder Safety: The “E” designation signifies built-in optical path encoders. While traditional 230V gates rely strictly on timers, this system monitors the motor’s revolution down to the millimeter. If the gate touches a vehicle, pedestrian, or obstacle, the control board senses the change and instantly reverses the gate’s direction.

• Completely Invisible Profile: Installed completely flush inside sub-driveway foundation boxes, the mechanical drive linkage acts directly as the bottom pivot hinge for the gate. The structural face of your custom timber or wrought-iron gates remains completely clean and clutter-free.

• No Central Gate Stops Needed: Built-in mechanical travel stops inside the foundation box mean the installer can mechanically set the open and close limits. This removes the need for tripping hazards or ugly metal stop blocks anchored into the center of your driveway.

• Rugged Waterproof Enclosure: The motor core is housed in an IP67-rated, dust-tight, and submersible cast-aluminum casing, allowing it to survive flooding and heavy rain inside the ground box.

Technical Specifications

Standard Kit Box Contents

1. 2 x FROG-AE 230V Motors: Complete with pre-wired encoder connections.

2. 2 x FROG Foundation Boxes: High-durability, anti-corrosive hot-dip steel casings (FROG-CF).

3. 2 x A4364 Manual Release Links: Robust tubular-type mechanical overrides for use during power outages.

4. 1 x ZLX230 Multifunction Control Panel: Features a digital programming display, electronic torque adjustments, and built-in slots for smartphone gateways.

5. 1 x AF43S Frequency Card & Tuned Antenna: 433.92 MHz secure radio receiver setup.

6. 2 x CAME Rolling Code Transmitters: High-security dual-channel remote control key fobs.

7. 1 x Pair of DIR10 Safety Photocells: Synchronized surface-mounted infrared safety beams.

CAME FrogAE – Pair Kit

CAME FrogAE – Single Kit