The 230V ATI range features updated engineering to natively support CAME CONNECT cloud management, modern safety standards, and significantly faster operational speeds.

The Two Kit Variants

When purchasing an ATI 230V kit, it is typically supplied in one of two configurations depending on the length of your gate leaves:

1. The 3-Meter Leaf Version (ATI 3000 / Model 801MP-0190): Designed for gate leaves up to 3.0 meters wide or up to 800 kg (400 kg at max 3m width). It features a 90° opening speed of approximately 13 seconds.

2. The 5-Meter Leaf Version (ATI 5000 / Model 801MP-0200): A long-stroke variant engineered for massive gates up to 5.0 meters wide or up to 1000 kg (400 kg at max 5m width). It features a 90° opening speed of approximately 19 seconds.

Standard Kit Components

A typical dual-leaf trade kit includes:

• 2 x ATI 230V Irreversible Motors: (Either 3m or 5m long-stroke rams) featuring built-in, easily adjustable internal mechanical limit switches.

• 1 x CAME Multifunction Control Panel:  The advanced ZLX230S control board featuring digital torque adjustment and self-diagnosing safety lines.

• 1 x AF43S Frequency Card: A plug-in radio frequency receiver (433.92 MHz).

• 2 x CAME Radio Remotes: Rolling code security transmitters (typically from the TOP Sport or TTS series).

• 1 x Pair of Safety Photocells: Synchronized infrared safety beams (DIR10 or adjustable DXR models).

• 1 x Tuned Antenna: (TOP-A433N) to optimize remote signal range.

Technical Specifications

Key Installer & User Advantages

• No Physical Ground Stops Required: The internal mechanical limit switches under the aluminum top casing allow the installer to set precise slowdown and stop points directly on the motor shaft, removing the need for physical metal stop blocks in the middle of your driveway.

• Irreversible Gearmotor: The internal planetary gear reduction and worm-screw mechanism naturally lock the gates tight when the motors stop, acting as a mechanical lock against manual forced entry.

• Pre-Welded Rear Brackets: Structural rear fixing plates are pre-engineered to speed up installation times on brick pillars or steel posts.

Powered by a high-torque 36V DC motor platform, this series bridges the gap between massive mechanical strength and low-voltage digital precision, operating effortlessly under intense duty cycles in punishing weather conditions (such as heavy snow, ice, and high wind resistance).

The Three Weight Class Variants

BKV kits are separated into three structural tiers depending on the mass of your sliding gate:

1. BKV15 (1500 kg / Models: BKV15AGS / BKV15AGE): Engineered for gates up to 1500 kg and up to 20 meters in length. Fitted with a standard Module 4 pinion.

2. BKV20 (2000 kg / Models: BKV20AGS / BKV20AGE): Built for gates up to 2000 kg and up to 20 meters in length. Fitted with a standard Module 4 pinion.

3. BKV25 (2500 kg / Models: BKV25AGS / BKV25AGE): Designed for extreme industrial applications up to 2500 kg. This unit upgrades to a wider, deep-toothed Module 6 pinion to properly distribute thrust force across the gear tracking.

Standard (AGS) vs. Plus (AGE) Versions: The premium Plus (AGE) kits include an on-board real-time schedule clock module and non-contact magnetic limit switches, which prevent mechanical components from freezing up in winter weather.

Core Innovations & Engineering

• 36V Adaptive Speed and Torque (AST): Unlike standard sliding motors that run blindly on fixed limits, the integrated ZN8 control panel monitors real-time track friction down to the millisecond. If dirt, gravel, or ice accumulates on the rail, the motor instantly scales up torque to clear the issue smoothly without triggering a false safety reversal.

• On-Board Time Clock Scheduling: No external third-party time clocks are required. The BKV’s motherboard allows installers to map out up to 8 custom automated schedules. For example, a commercial logistics center can program the gate to lock wide open Monday through Friday from 6:00 AM to 9:00 AM and return to standard secure secure-close protocols automatically.

• Direct-Drive Isolate Manual Release: Safety and ease of use are prioritized through a key-protected quick-release handle. The physical act of turning the key automatically isolates the primary 230V mains power layout instantly, ensuring safe manual manual override operations in an emergency.

• Backlit Graphic Display Wizard: Setup is streamlined via an onboard blue backlit LCD. A 7-step guided configuration wizard prompts the installer for critical parameters, completely automating travel profiling and accessory registration.

Technical Specifications

Standard Kit Box Contents

• 1 x BKV 36V Motor Chassis: Finished in charcoal grey (RAL 7024) with built-in encoder path tracker and integrated ZN8 graphical control panel.

• 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio receiver module.

• 1 x Pair of DIR20 Heavy-Duty Safety Photocells: Large-aperture infrared safety beams.

• 2 x CAME High-Security Transmitters: Four-channel secure rolling-code remote fobs.

• 1 x TOP-A433N Tuned Antenna: To guarantee exceptional remote response range.

Options available

BKV1500P – 36v kit for use with a sliding gate up to 1500kg @ 20m

BKV2000P – 36v kit for use with a sliding gate up to 2000kg @ 20m

BKV2500P – 36v kit for use with a sliding gate up to 2500kg @ 20m (Rack to be used 30 x 30mm galvanised steel)

Module rack available to buy separately

The defining characteristic of the ATS series is its advanced structural geometry. It features a unique, ultra-slim telescopic shaft housed within a rigid aluminum casing. This layout allows it to solve the “C-Max” problem, mounting onto deep brick or stone pillars where standard linear rams would strike the pillar edge, all without requiring you to carve pockets into the masonry.

Core Engineering & Variants

The ATS system is divided into two distinct power platforms to match your exact traffic and safety requirements:

• The 24V DC Smart Platform (ATS-DGS): Built for continuous intensive use (apartment blocks or busy family estates). Driven by an internal optical encoder, it communicates with the control board down to the millimeter to provide sensitive anti-crushing obstacle detection, smooth deceleration ramps, and optional battery backup functionality during power cuts.

• The 230V AC Torque Platform (ATS-AGS): Engineered for standard residential homes used a few times a day. It delivers massive physical driving force to push through wind-loading on close-boarded or sheeted timber gates, operating on standard mains timers with an integrated 150°C thermal cutout.

The Two Mechanical Sizes

Both the 24V and 230V systems are manufactured in two stroke lengths depending on your gate’s layout:

1. ATS30 (3-Meter Leaf): Optimized for gates up to 3.0 meters wide or up to 800 kg per leaf (dropping to 400 kg at max 3m width).

2. ATS50 (5-Meter Leaf): A long-stroke, high-leverage operator engineered for expansive estate gates up to 5.0 meters wide or up to 1000 kg per leaf (dropping to 400 kg at max 5m width).

Technical Specifications

Standard Kit Box Contents

1. 2 x ATS Telescopic Ram Motors: Featuring internal, fully adjustable mechanical open and close travel limit switches.

2. 1 x Multifunction Digital Control Panel: The ZL65 board (for 24V) or ZLX230 (for 230V), complete with a digital display for diagnostic testing and torque profiling.

3. 1 x AF43S Frequency Card: Plug-in 433.92 MHz secure radio receiver module.

4. 2 x CAME High-Security Transmitters: Rolling-code multi-channel handheld remotes.

5. 1 x Pair of DIR10 Safety Photocells: Synchronized infrared safety beams to prevent gates closing on obstructions.

6. 1 x TOP-A433N Tuned Antenna: To guarantee exceptional remote response range.

The modular platform handles gate leaves ranging from standard 3.0-meter residential gates up to massive 7.0-meter commercial perimeters, utilizing an integrated tracking encoder for active anti-crush safety, user-defined slowdown curves, and adaptive wind-resistance management.

Core Engineering & Mechanical Design

• Dual-Voltage Versatility:

  • 24V DC Models (AX3024 / AX5024): Rated for continuous intensive service profiles; runs cool under constant cycles and supports plug-in battery backup integration (LB180) to guarantee system uptime during a blackout.

  • 230V AC Models (AX302304 / AX402306 / AX71230): High-inertia single-phase motors that deliver massive starting thrust to push heavy iron or wood-clad gates through strong head-winds.

• Intelligent Smart Control & Safety: Managed via the modern ZLX24 (24V) or ZLX230 (230V) advanced command display panels. The absolute travel tracking system uses an electronic encoder to eliminate harsh structural slams and safely reverses gate travel upon meeting a physical obstacle.

• Reversible Gear Architecture (4m/7m Models): Extra-wide variations (AX412306 and AX71230) are built with reversible gearing to prevent high wind loads from stripping internal gear teeth, strictly requiring an electric solenoid lock or magnetic lock to anchor the perimeter shut.

• Integrated Mechanical Stops: Features built-in, fully adjustable physical mechanical travel limits along the bottom of the linear ram, eliminating the need to anchor unappealing metal stop blocks in the centre of the driveway.

Technical Specifications Matrix

Standard Kit Box Contents

1. 1 or 2 x Axo Electromechanical Ram Motors: Features multi-position structural mounting brackets, a protected worm screw, and built-in mechanical limit stops.

2. 1 x Advanced Control Board: Dual-leaf control framework with a programming screen, self-diagnosing safety circuits, and multi-user rolling code memory.

3. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

4. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for reliable driveway threshold protection.

5. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Carbon-fiber textured 4-button rolling code remotes running on a secure 433.92 MHz wireless link to prevent cloning.

6. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass ambient signal interference and maximize remote operational range.

CAME Axo – Pair Kit

CAME Axo – Single Kit

The high-inertia system is optimized for heavy wrought-iron or solid-clad timber gates measuring up to 3.5 meters in length or up to 800 kg per leaf, providing a massive 320 Nm of starting torque within a fully waterproof IP67-rated submersible enclosure.

Core Engineering & Mechanical Design

• Invisible Surface Aesthetic: The electromechanical gearmotors drop completely out of sight beneath the driveway line, leaving only a heavy-duty steel drive plate visible flush with the paving stones.

• High-Inertia Raw Torque: Powered by a line-voltage 230V single-phase motor, the system generates deep starting thrust to cleanly swing wide, wind-resistant or fully boarded timber leaves that might stall lower-voltage setups.

• IP67 Submersible Architecture: Built to survive harsh outdoor drainage environments, the motor casings are fully sealed against water and dust infiltration, allowing the system to continue running safely even if the foundation box temporarily fills with standing rainwater.

• Self-Locking Drive Security: The FROG-A utilizes an irreversible gear design that mechanically locks the gates securely in place when the motor stops, providing structural perimeter defence without strictly requiring a secondary physical latch.

Technical Specifications Matrix

Standard Kit Box Contents

1. 2 x FROG-A 230V Gearmotors: Heavy-duty, self-locking underground electromechanical drive units with integrated opening limits.

2. 2 x FROG-CF Foundation Boxes: Heavy-gauge protective steel foundation casings treated with an anti-rust cataphoresis coating.

3. 2 x A4364 Key Overrides: Custom steel mechanical release keys and lever linkages used to manually unlock and swing the gates freely during a power cut.

4. 1 x Advanced Control Board: Dual-leaf 230V command panel featuring an LCD programming display and automated safety circuit diagnostics.

5. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

6. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for clear driveway boundary defence.

7. 2 x TOP SPORT (TOP44RBN) Transmitters: Carbon-fibre textured 4-button rolling code remotes running on a secure 433.92 MHz link to block signal cloning.

8. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass structural boundary walls and maximize remote operational range.

CAME Frog – Pair Kit

CAME Frog – Single Kit