The 230V ATI range features updated engineering to natively support CAME CONNECT cloud management, modern safety standards, and significantly faster operational speeds.

The Two Kit Variants

When purchasing an ATI 230V kit, it is typically supplied in one of two configurations depending on the length of your gate leaves:

1. The 3-Meter Leaf Version (ATI 3000 / Model 801MP-0190): Designed for gate leaves up to 3.0 meters wide or up to 800 kg (400 kg at max 3m width). It features a 90° opening speed of approximately 13 seconds.

2. The 5-Meter Leaf Version (ATI 5000 / Model 801MP-0200): A long-stroke variant engineered for massive gates up to 5.0 meters wide or up to 1000 kg (400 kg at max 5m width). It features a 90° opening speed of approximately 19 seconds.

Standard Kit Components

A typical dual-leaf trade kit includes:

• 2 x ATI 230V Irreversible Motors: (Either 3m or 5m long-stroke rams) featuring built-in, easily adjustable internal mechanical limit switches.

• 1 x CAME Multifunction Control Panel:  The advanced ZLX230S control board featuring digital torque adjustment and self-diagnosing safety lines.

• 1 x AF43S Frequency Card: A plug-in radio frequency receiver (433.92 MHz).

• 2 x CAME Radio Remotes: Rolling code security transmitters (typically from the TOP Sport or TTS series).

• 1 x Pair of Safety Photocells: Synchronized infrared safety beams (DIR10 or adjustable DXR models).

• 1 x Tuned Antenna: (TOP-A433N) to optimize remote signal range.

Technical Specifications

Key Installer & User Advantages

• No Physical Ground Stops Required: The internal mechanical limit switches under the aluminum top casing allow the installer to set precise slowdown and stop points directly on the motor shaft, removing the need for physical metal stop blocks in the middle of your driveway.

• Irreversible Gearmotor: The internal planetary gear reduction and worm-screw mechanism naturally lock the gates tight when the motors stop, acting as a mechanical lock against manual forced entry.

• Pre-Welded Rear Brackets: Structural rear fixing plates are pre-engineered to speed up installation times on brick pillars or steel posts.

801MB-0110
FTL20DGC – Irreversible motor complete with electronic card with dip switch settings, built-in radio remote programming and articulated transmission arm for swing gates up to 2 m per leaf. RAL7024 grey cover.

801MB-0120
FTX20DLC – Irreversible gear motor with articulated transmission arm for swing gates up to 2 m for leaf and C max. 150 mm. RAL7024 grey cover.

002ZL65
Control panel for one or two leaf swing gates with electronic board, built-in radio remote programming and self-diagnosis of the safety devices.

001AF43S
Plug-in radio-frequency control card

806TS-0122
TOPD4FKS – Four-channel dual frequency transmitter with self-learning function, black color.

001TOP-A433N
Tuned Antenna.

001DIR10
Pair of 12 – 24 V AC – DC outdoor photocells range 10 m.

801MB-0080
FTL20DGC – Irreversible motor complete with electronic card with dip switch settings, built-in radio remote programming and articulated transmission arm for swing gates up to 2 m per leaf. RAL7024 grey cover.

801MB-0050
FTX20DGS – Irreversible gear motor with articulated transmission arm for swing gates up to 2 m for leaf and C max. 150 mm. RAL7024 grey cover.

002ZL60
Control panel for one or two leaf swing gates with dip switch settings, built-in radio remote programming and self-diagnosis of the safety devices.

001AF43S
Plug-in radio-frequency control card

806TS-0102
TOPD4FKS – Four-channel dual frequency transmitter with self-learning function, black color.

001TOP-A433N
Tuned Antenna.

001DIR10
Pair of 12 – 24 V AC – DC outdoor photocells range 10 m.

1 of 801MP-0040
AXI25DGS – Irreversible geared motor with encoder for swing gates with up to 2.5 m leaves. RAL7024-gray color.

1 of 002ZL65
Control panel for one or two leaf swing gates with programming display, built-in radio remote programming and self-diagnosis of the safety devices

1 of 001AF43S
Plug-in radio-frequency control card

2 of 806TS-0122
TOPD4RKS – Double frequency 4-button rolling code transmitter, black colour.

1 of 001TOP-A433N
Tuned Antenna.

1 of 001DIR10
Pair of 12 – 24 V AC – DC outdoor photocells – range 10 m.

2 of 801MP-0040
AXI25DGS – Irreversible geared motor with encoder for swing gates with up to 2.5 m leaves. RAL7024-gray color.

1 of 002ZL65
Control panel for one or two leaf swing gates with programming display, built-in radio remote programming and self-diagnosis of the safety devices

1 of 001AF43S
Plug-in radio-frequency control card

2 of 806TS-0122
TOPD4RKS – Double frequency 4-button rolling code transmitter, black colour.

1 of 001TOP-A433N
Tuned Antenna.

1 of 001DIR10
Pair of 12 – 24 V AC – DC outdoor photocells – range 10 m.

801MP-0020

AXL20DGS – Irreversible gear motor with encoder for swing gates up to 2 m per leaf. RAL7024 grey color.

002ZL60

Control panel for one or two leaf swing gates with dip switch settings, built-in radio remote programming and self-diagnosis of the safety devices.

001AF43S

Plug-in radio-frequency control card

806TS-0102

TOPD4FKS – Four-channel dual frequency transmitter with self-learning function, black color.

001TOP-A433N

Tuned Antenna.

001DIR10

Pair of 12 – 24 V AC – DC outdoor photocells – range 10 m.

The system is optimized for pedestrian gates, compact residential entrances, and lightweight ornamental leaves measuring up to 1.8 meters in length per leaf.

Core Engineering & Mechanical Design

• Ultra-Slim Form Factor: Encased in a sleek, durable anodized aluminum structure, the Stylo delivers external automation without needing massive, bulky arm enclosures. It can fit seamlessly into tight courtyard thresholds or behind pillars where a standard linear ram would bind against the wall.

• Dual Arm Configurations: To accommodate varied structural layouts, the Stylo can be fitted with two distinct arm styles:

  • STYLO-BS (Articulated Arm): Allows the gate to open up to 120°, providing smooth mechanical leverage.

  • STYLO-BD (Straight Arm with Slide Guide): Specially configured for installations where the gate is mounted directly flush against an intersecting wall, allowing an opening angle of up to 135°.

• Low-Voltage Intensive Use Profile: Powered by a 24V DC motor drawing a maximum of 48W, the system is rated for heavy-duty/continuous residential operation. Its low-voltage architecture runs cool under constant cycles and supports simple, plug-in battery backup systems to maintain security during power blackouts.

• Precision Encoder Movement Control: Driven by an integrated optical encoder running on modern ZLX24-series command panels, the system monitors layout travel down to millimetric tolerances. This provides active anti-crush obstacle sensing, user-defined ramp slowdown profiles, and Adaptive Speed & Torque technology to counteract wind drag.

Technical Specifications

Standard Kit Box Contents

1. 1 or 2 x STYLO-ME 24V Gearmotors: Slimline electromechanical units with integrated travel monitoring encoders (Reversible STYLO-RME variants can be specified if electronic manual locks are preferred).

2. 1 or 2 x STYLO Transmission Arms: Choice of STYLO-BS articulated arms or STYLO-BD straight slide-guide rails based on wall proximity.

3. 1 x ZLX24 Advanced Control Board: Dual-leaf 24V control framework with a programming display, self-diagnosing safety circuitry, and an integrated 250 to 1000 user memory slot.

4. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver card.

5. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for compact residential thresholds.

6. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Sleek, carbon-fiber textured 4-button rolling code remotes running on a secure 433.92 MHz link.

7. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass ambient signal interference and maximize remote operational range.

CAME Stylo – Pair Kit

CAME Stylo – Single Kit

The modular platform handles gate leaves ranging from standard 3.0-meter residential gates up to massive 7.0-meter commercial perimeters, utilizing an integrated tracking encoder for active anti-crush safety, user-defined slowdown curves, and adaptive wind-resistance management.

Core Engineering & Mechanical Design

• Dual-Voltage Versatility:

  • 24V DC Models (AX3024 / AX5024): Rated for continuous intensive service profiles; runs cool under constant cycles and supports plug-in battery backup integration (LB180) to guarantee system uptime during a blackout.

  • 230V AC Models (AX302304 / AX402306 / AX71230): High-inertia single-phase motors that deliver massive starting thrust to push heavy iron or wood-clad gates through strong head-winds.

• Intelligent Smart Control & Safety: Managed via the modern ZLX24 (24V) or ZLX230 (230V) advanced command display panels. The absolute travel tracking system uses an electronic encoder to eliminate harsh structural slams and safely reverses gate travel upon meeting a physical obstacle.

• Reversible Gear Architecture (4m/7m Models): Extra-wide variations (AX412306 and AX71230) are built with reversible gearing to prevent high wind loads from stripping internal gear teeth, strictly requiring an electric solenoid lock or magnetic lock to anchor the perimeter shut.

• Integrated Mechanical Stops: Features built-in, fully adjustable physical mechanical travel limits along the bottom of the linear ram, eliminating the need to anchor unappealing metal stop blocks in the centre of the driveway.

Technical Specifications Matrix

Standard Kit Box Contents

1. 1 or 2 x Axo Electromechanical Ram Motors: Features multi-position structural mounting brackets, a protected worm screw, and built-in mechanical limit stops.

2. 1 x Advanced Control Board: Dual-leaf control framework with a programming screen, self-diagnosing safety circuits, and multi-user rolling code memory.

3. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

4. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for reliable driveway threshold protection.

5. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Carbon-fiber textured 4-button rolling code remotes running on a secure 433.92 MHz wireless link to prevent cloning.

6. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass ambient signal interference and maximize remote operational range.

CAME Axo – Pair Kit

CAME Axo – Single Kit

The system relies on a heavy-duty articulated arm to cleanly reach around wide pillars, driving gate leaves up to 2.3 meters in length or up to 300 kg in weight per leaf.

Core Engineering & Mechanical Design

• Deep Pillar Problem Solver: Engineered to handle structural clearance issues, the Fast 70 can comfortably mount to wide pillars with an internal hinge-to-wall offset (C-max dimension) reaching up to 200 mm, allowing smooth leverage without cutting niches into brickwork.

• Dual-Voltage Configurations:

  • 24V DC Models (FA7024CB / FA7024): Built for continuous intensive use (up to 65 cycles per hour). Runs cool under constant loads and integrates with optional battery backup kits (LB180) to keep perimeters functional during blackouts.

  • 230V AC Models (FA70230CB / FA70230): High-torque single-phase motors ideal for standard residential properties requiring a 30% duty cycle rating.

• Integrated Intelligent Command Hub: The master motor housing (FA7024CB) contains the system’s control board, eliminating the need to wire an external wall-mounted box. The 24V board uses absolute encoder tracking to provide millimetric travel positioning, active anti-crush obstacle sensing, and customizable end-of-travel deceleration zones.

• Safe Trap-Free Articulation: Built within a weather-resistant IP54-rated housing, the heavy-duty articulated transmission arms fold neatly into a compact footprint to drastically reduce trapping risks between the arm and surrounding boundary structures.

Technical Specifications Matrix

Standard Kit Box Contents

1. 1 x Master 24V/230V Motor Assembly: Contains the internal digital command board, mechanical limit switches, and an ergonomic manual key-release layout.

2. 1 x Slave 24V/230V Motor Assembly: High-torque secondary gearmotor unit.

3. 2 x Heavy-Duty Articulated Transmission Arms: Solid steel arm linkages designed to transfer motor torque seamlessly around deep pillar profiles.

4. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver card.

5. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for clear driveway boundary defence.

6. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Carbon-fibre textured 4-button rolling code remotes running on a secure 433.92 MHz link to prevent signal cloning.

7. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass structural masonry interference and maximize remote operational range.

CAME Fast70 – Pair Kit

CAME Fast70 – Single Kit