The high-inertia system is optimized for heavy wrought-iron or solid-clad timber gates measuring up to 3.5 meters in length or up to 800 kg per leaf, providing a massive 320 Nm of starting torque within a fully waterproof IP67-rated submersible enclosure.

Core Engineering & Mechanical Design

• Invisible Surface Aesthetic: The electromechanical gearmotors drop completely out of sight beneath the driveway line, leaving only a heavy-duty steel drive plate visible flush with the paving stones.

• High-Inertia Raw Torque: Powered by a line-voltage 230V single-phase motor, the system generates deep starting thrust to cleanly swing wide, wind-resistant or fully boarded timber leaves that might stall lower-voltage setups.

• IP67 Submersible Architecture: Built to survive harsh outdoor drainage environments, the motor casings are fully sealed against water and dust infiltration, allowing the system to continue running safely even if the foundation box temporarily fills with standing rainwater.

• Self-Locking Drive Security: The FROG-A utilizes an irreversible gear design that mechanically locks the gates securely in place when the motor stops, providing structural perimeter defence without strictly requiring a secondary physical latch.

Technical Specifications Matrix

Standard Kit Box Contents

1. 2 x FROG-A 230V Gearmotors: Heavy-duty, self-locking underground electromechanical drive units with integrated opening limits.

2. 2 x FROG-CF Foundation Boxes: Heavy-gauge protective steel foundation casings treated with an anti-rust cataphoresis coating.

3. 2 x A4364 Key Overrides: Custom steel mechanical release keys and lever linkages used to manually unlock and swing the gates freely during a power cut.

4. 1 x Advanced Control Board: Dual-leaf 230V command panel featuring an LCD programming display and automated safety circuit diagnostics.

5. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

6. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for clear driveway boundary defence.

7. 2 x TOP SPORT (TOP44RBN) Transmitters: Carbon-fibre textured 4-button rolling code remotes running on a secure 433.92 MHz link to block signal cloning.

8. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass structural boundary walls and maximize remote operational range.

CAME Frog – Pair Kit

CAME Frog – Single Kit

1. Core Engineering & Performance

• 230V AC Models (FROG-A / FROG-AE):

  • Best For: Standard residential estates where high power is needed to move heavy, solid-clad or wind-resistant gates.

  • Performance: Delivers massive, consistent starting torque to handle heavy iron or timber gates.

  • Key Variation: The AE model includes an electronic encoder for precise position tracking and smooth end-of-travel slowdowns.

• 24V DC Models (FROG-A24 / FROG-A24E):

  • Best For: Intensive-use properties (apartments, gated communities, or high-traffic homes).

  • Performance: Rated for continuous operation. Because they run on low voltage, they run cooler and include built-in obstacle detection.

  • Key Advantage: Can be fitted with an optional backup battery system (LB180), ensuring the gate remains operational during power outages.

2. Technical Specifications Matrix

3. Common Features Across Both Versions

• Invisible Installation: Both versions utilize the same FROG-CF foundation boxes, ensuring the motor is hidden completely beneath the driveway paving.

• IP67 Waterproofing: Every motor is factory-sealed to withstand flooding or water saturation within the underground foundation box.

• Manual Override: Both kits include the custom A4364 steel linkage key for manual release during emergencies.

• Structural Integrity: All motors are built with die-cast aluminium housings and cataphoresis-treated steel casings to prevent corrosion.

4. Standard Kit Box Contents

Regardless of the voltage chosen, the CAME Frog kits come as a “system-in-a-box”:

1. Motors: 1 or 2 x FROG gearmotors (230V or 24V).

2. Foundation: 1 or 2 x FROG-CF foundation boxes.

3. Override: 1 or 2 x Manual release mechanisms (A4364).

4. Control: 1 x Advanced control panel (ZLX230 for 230V / ZLX24 for 24V) with LCD screen.

5. Connectivity: 1 x AF43S receiver card.

6. Safety: 1 x Pair of DIR10 safety photocells.

7. Access: 2 x TOP SPORT (TOP44RBN) rolling-code remotes.

8. Range: 1 x TOP-A433N tuned antenna.

CAME FrogAE – Pair Kit

CAME FrogAE – Single Kit