Unlike the ATI range, which features a classic rectangular profile, the AXO series is constructed with structural aluminum half-castings housing an advanced, fully enclosed epicyclical reduction worm-screw drive. The 230V variant is engineered to provide massive physical leverage for heavy gates without requiring an encoder module for standard operation.

The Two Kit Variants

Depending on the width and structural mass of your gate leaves, the AXO 230V kit is supplied in two distinct stroke lengths:

1. The 3-Meter Leaf Version (AXO AX30230 / Kit AXO-P323): Optimized for gate leaves up to 3.0 meters wide or up to 800 kg per leaf (dropping to 500 kg at max 3m width). It delivers a fixed 90° opening speed of approximately 20 seconds.

2. The 5-Meter Leaf Version (AXO AX50230 / Kit AXO-P523): A long-stroke, high-leverage operator engineered for massive gates up to 5.0 meters wide or up to 1000 kg per leaf (dropping to 400 kg at max 5m width). It features an opening speed of approximately 40 seconds.

Standard Kit Components

A premium dual-leaf trade kit typically includes:

• 2 x AXO 230V Irreversible Rams: Built with a fully enclosed worm-screw and integrated internal mechanical travel stops.

• 1 x CAME Multi-Function Control Panel: Modern iterations feature the advanced ZLX230S digital control board, enabling electronic digital torque regulation.

• 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

• 2 x CAME Rolling Code Transmitters: High-security handheld key fobs.

• 1 x Pair of DIR-10 Safety Photocells: Surface-mounted infrared safety beams.

• 1 x TOP-A433N Tuned Antenna: To optimize radio signal reception range.

Technical Specifications

Key Architectural & Mechanical Advantages

• Shielded Worm-Screw Drive: The rotating steel worm-screw is entirely enclosed within the lower chassis. This prevents road grit, fallen leaves, salt spray, and ice from fouling the mechanics—a major benefit over open-screw alternative rams.

• No Central Gate Stops Needed: Built-in mechanical limit switches are positioned along the internal shaft track. Installers can precisely set the open and close limits directly on the motor, removing the need for physical metal stop blocks in the middle of the driveway.

• Irreversible Self-Locking System: The planetary gear reduction naturally locks the gate rigid when the motor stops, providing structural resistance against forced manual entry without needing an immediate electric lock on smaller gate spans.

CAME Axo – Pair Kit

CAME Axo – Single Kit