The CAME FROG-X 24V Double Underground Gate Automation Kit represents the next generation of subterranean swing gate automation. Driven by high-efficiency 24V digital brushless motors, FROG-X offers near-silent operation, rapid opening times, and continuous-duty performance without wear and tear.

Equipped with CAME Connect smart gateway technology and supplied with 5 remote controls, this all-in-one bundle delivers maximum perimeter security, smart app management, and convenient access for the whole household or team.

Key Features & Benefits

• 24V Digital Brushless Technology: High efficiency with zero friction parts, ensuring an extraordinary 250,000-cycle MCBF (Mean Cycles Between Failures) lifespan.
• CAME Connect Integration: Monitor, control, and configure your gate system remotely via smartphone app or web platform from anywhere in the world.
• 5 Transmitters Included: Supplied with 5 CAME high-security rolling code remotes for multi-user access.
• Rapid & Silent Opening: Opens gates to 90° in just 10 seconds.
• IP67 Weather Protection: Sealed aluminium housing built to withstand severe weather and ground-level water exposure.
• Adaptive Speed & Torque Technology (AST): Automatically compensates for wind resistance and seasonal weather changes to prevent false obstacle stops.

What’s Included in the Bundle?

• 2x CAME FROG-X 24V Brushless Underground Motors
• 2x FROG Heavy-Duty Underground Foundation Boxes
• 2x Manual Emergency Release Systems
• 1x CAME ZLB24-SA Advanced Control Panel with CXN BUS
• 1x CAME Connect RGSM Gateway Gateway & SIM Bundle
• 1x Pair of Safety Photocells
• 5x CAME Rolling Code Remote Controls
• 1x Antenna & Radio Card

Technical Specifications

The CAME FROG-X 24V Double Underground Gate Automation Kit represents the next generation of subterranean swing gate automation. Driven by high-efficiency 24V digital brushless motors, FROG-X offers near-silent operation, rapid opening times, and continuous-duty performance without mechanical wear.

Equipped with dual vandal-resistant keypads—allowing PIN-controlled access for both arriving and departing traffic—and integrated CAME Connect, this all-in-one bundle delivers maximum perimeter security, smart app management, and controlled entry and exit.

Key Features & Benefits

• 24V Digital Brushless Technology: High efficiency with zero friction parts, ensuring an extraordinary 250,000-cycle MCBF (Mean Cycles Between Failures) lifespan.
• Dual Vandal-Resistant Keypads: Heavy-duty, weather-sealed keypads for both entry and exit posts, ensuring secure PIN access without requiring transmitters or fobs.
• CAME Connect Integration: Monitor, control, and configure your gate system remotely via smartphone app or web platform from anywhere in the world.
• Rapid & Silent Opening: Opens gates to 90° in just 10 seconds.
• IP67 Weather Protection: Sealed aluminium housing built to withstand severe weather and ground-level water exposure.
• Adaptive Speed & Torque Technology (AST): Automatically compensates for wind resistance and seasonal weather changes to prevent false obstacle stops.

What’s Included in the Bundle?

• 2x CAME FROG-X 24V Brushless Underground Motors
• 2x FROG Heavy-Duty Underground Foundation Boxes
• 2x Manual Emergency Release Systems
• 1x CAME ZLB24-SA Advanced Control Panel with CXN BUS
• 2x Vandal-Resistant Digital Keypads (Entry & Exit)
• 1x CAME Connect RGSM Gateway Gateway & SIM Bundle
• 1x Pair of Safety Photocells
• 2x CAME Rolling Code Remote Controls
• 1x Antenna & Radio Card

Technical Specifications

The CAME FROG-X 24V Double Underground Gate Automation Kit represents the next generation of subterranean swing gate automation. Driven by high-efficiency 24V digital brushless motors, FROG-X offers near-silent operation, rapid opening times, and continuous-duty performance without wear and tear.

Paired with a vandal-resistant 4G GSM keypad intercom, a wireless vehicle loop detector, and CAME Connect, this all-in-one bundle delivers maximum perimeter security and effortless multi-user entry.

Key Features & Benefits

• 24V Digital Brushless Technology: High efficiency with zero friction parts, ensuring an extraordinary 250,000-cycle MCBF (Mean Cycles Between Failures) lifespan.
• Vandal-Resistant 4G GSM Intercom: Call landlines or mobile phones directly when a visitor arrives. Features a robust anti-vandal casing and integrated keypad for pin code access.
• Wireless Vehicle Detector: Automatically opens the gates for outgoing vehicles, eliminating the need to cut trenches or wire traditional loop detectors into the driveway.
• CAME Connect Integration: Monitor, control, and configure your gate system remotely via smartphone app or web platform.
• Rapid & Silent Opening: Opens gates to 90° in just 10 seconds.
• IP67 Weather Protection: Sealed aluminium housing built to withstand severe weather and ground-level water exposure.
• Adaptive Speed & Torque Technology (AST): Automatically compensates for wind resistance and seasonal weather changes to prevent false obstacle stops.

What’s Included in the Bundle?

• 2x CAME FROG-X 24V Brushless Underground Motors
• 2x FROG Heavy-Duty Underground Foundation Boxes
• 2x Manual Emergency Release Systems
• 1x CAME ZLB24-SA Advanced Control Panel with CXN BUS
• 1x Vandal-Resistant 4G GSM Intercom with Built-In Keypad
• 1x Wireless Vehicle Loop/Detector System
• 1x CAME Connect RGSM Gateway Gateway & SIM Bundle
• 1x Pair of Safety Photocells
• 2x CAME Rolling Code Remote Controls
• 1x Antenna & Radio Card

Technical Specifications

By removing the brushes—the primary wear point in traditional motors—CAME has created an virtually silent underground system designed for continuous operation, boastings an outstanding Mean Cycles Between Failures (MCBF) of 250,000 cycles (over 2.5 times the lifespan of previous 24V models).

Core Innovation & Mechanics

• Rapid Brushless Performance: The 24V brushless architecture provides unmatched speed, throwing a gate leaf open to 90° in as little as 10 seconds. This significantly cuts down driveway idling time and enhances property security.

• Adaptive Speed & Torque Technology (AST): Backed by advanced firmware, the motor dynamically reads real-time structural resistance. If wind shear, dirt, or debris enters the gate’s path, the motor smoothly adjusts power output to maintain a constant speed, while immediately backing off and reversing if a solid obstacle (like a vehicle or pedestrian) is struck.

• CXN BUS Simplified Setup: Features CAME’s proprietary BUS connectivity. Photocell sensors, keypads, and safety edges wire directly back to the panel using simple, non-polarized 2-wire loops, dramatically lowering installation layout errors.

• Legacy Drop-In Compatibility: CAME engineered the physical form factor of the Frog X motor casing to fit flawlessly inside older, existing FROG foundation cases. You can upgrade a decade-old system to modern brushless tech without lifting existing ground concrete.

Technical Specifications

Standard Kit Box Contents

1. 2 x FROG-X 24V Brushless Motors: Complete with built-in electronic path encoders.

2. 2 x FROG Steel Foundation Boxes: Treated with high-durability anti-corrosion finishes.

3. 2 x Custom-Profile Override Release Keys: For manual control during power dropouts.

4. 1 x ZLB24-SA Smart Control Panel: Features a blue backlit graphical text display, standard DIN-rail mounting options, and a tilting internal chassis for clean wiring.

5. 1 x AF43S Receiver & Tuned Antenna: 433.92 MHz radio frequency system.

6. 2 x CAME Rolling Code Remotes: High-security handheld key fobs.

7. 1 x Pair of Surface-Mounted BUS Photocells: Synchronized safety beams.

CAME Frog X – Pair Kit

CAME Frog X – Single Kit

By utilizing 24V DC encoder motors (FROG-A24E) alongside a modern digital control ecosystem, this kit represents CAME’s benchmark underground solution for intensive-use residential properties, luxury developments, and high-traffic commercial entrances where visible automation would spoil the architecture.

Core Engineering & Safety Features

• Intensive / Continuous Duty Cycles: Unlike traditional 230V systems that can suffer from thermal cut out under heavy, repetitive usage, the 24V DC motor architecture runs exceptionally cool. It handles demanding, non-stop operation seamlessly.

• Physical Optical Encoder Safety: The “E” designation signifies built-in electronic path encoders. The onboard computer monitors the rotation of each motor down to the millimeter. If a gate leaf touches a vehicle, pedestrian, or pet, the system instantly detects the spike in structural resistance and safely reverses the gate’s direction.

• Completely Invisible Profile: Installed completely flush inside sub-driveway foundation boxes, the mechanical drive linkage acts directly as the bottom pivot hinge for the gate. The structural face of your custom timber or wrought-iron gates remains entirely clean.

• Internal Mechanical Travel Stops: Built-in adjustable physical stops inside the motor casing mean the installer can mechanically set the open and close limits. This removes the need for tripping hazards or ugly metal stop blocks anchored into the center of your driveway.

Technical Specifications

Standard Kit Box Contents

1. 2 x FROG-A24E 24V Motors: Complete with pre-wired encoder connections.

2. 2 x FROG Foundation Boxes: High-durability, anti-corrosive hot-dip steel casings (Stainless steel available in premium trade variants).

3. 2 x A4364 Manual Release Links: Robust tubular-type 10 lever-key mechanical overrides for use during power outages.

4. 1 x ZLX24 Multifunction Control Panel: Features a graphical text or 7-segment programming display, Adaptive Speed & Torque Technology (AST), and built-in slots for smartphone gateways.

5. 1 x AF43S Frequency Card & Tuned Antenna: 433.92 MHz secure radio receiver setup.

6. 2 x CAME Rolling Code Transmitters: High-security dual-channel remote control key fobs.

7. 1 x Pair of DIR10 or BUS Photocells: Synchronized surface-mounted safety beams.

CAME FrogAE – Pair Kit

CAME FrogAE – Single Kit

By pairing robust 230V AC motors (FROG-AE) with built-in electronic encoders, this kit delivers the massive crushing and driving torque of mains-powered motors alongside the sophisticated safety features typically reserved for low-voltage setups. It is a favorite choice for large, heavy residential gates or structural estate entrances where visible automation would spoil the clean look of the architecture.

Core Engineering & Safety Features

• Mains Power with Encoder Safety: The “E” designation signifies built-in optical path encoders. While traditional 230V gates rely strictly on timers, this system monitors the motor’s revolution down to the millimeter. If the gate touches a vehicle, pedestrian, or obstacle, the control board senses the change and instantly reverses the gate’s direction.

• Completely Invisible Profile: Installed completely flush inside sub-driveway foundation boxes, the mechanical drive linkage acts directly as the bottom pivot hinge for the gate. The structural face of your custom timber or wrought-iron gates remains completely clean and clutter-free.

• No Central Gate Stops Needed: Built-in mechanical travel stops inside the foundation box mean the installer can mechanically set the open and close limits. This removes the need for tripping hazards or ugly metal stop blocks anchored into the center of your driveway.

• Rugged Waterproof Enclosure: The motor core is housed in an IP67-rated, dust-tight, and submersible cast-aluminum casing, allowing it to survive flooding and heavy rain inside the ground box.

Technical Specifications

Standard Kit Box Contents

1. 2 x FROG-AE 230V Motors: Complete with pre-wired encoder connections.

2. 2 x FROG Foundation Boxes: High-durability, anti-corrosive hot-dip steel casings (FROG-CF).

3. 2 x A4364 Manual Release Links: Robust tubular-type mechanical overrides for use during power outages.

4. 1 x ZLX230 Multifunction Control Panel: Features a digital programming display, electronic torque adjustments, and built-in slots for smartphone gateways.

5. 1 x AF43S Frequency Card & Tuned Antenna: 433.92 MHz secure radio receiver setup.

6. 2 x CAME Rolling Code Transmitters: High-security dual-channel remote control key fobs.

7. 1 x Pair of DIR10 Safety Photocells: Synchronized surface-mounted infrared safety beams.

CAME FrogAE – Pair Kit

CAME FrogAE – Single Kit

The platform is split into two distinct mechanical configurations depending on whether your project requires maximum gate mass or maximum structural leaf width.

Core Engineering & Mechanical Design

• High-Inertia Industrial Drive: Driven by a high-torque 230V AC motor, the Frog Plus generates a massive 800 Nm of structural torque. This immense power allows it to reliably swing heavy iron or timber-clad gates through severe wind resistance without stalling or binding.

• IP67 Submersible Foundation Box: The motor is encased inside the heavy-gauge Frog-PC steel foundation box, treated with an anti-rust cataphoresis coating. It features a verified IP67 watertight rating, meaning it can survive temporary flooding, though proper soakaway drainage is required.

• Advanced ZM3EP Control Framework: The kit is managed by the ZM3EP graphic display panel. This advanced control board features self-diagnosing safety circuitry, real-time error-logging diagnostics, and adjustable mechanical travel limits.

• Robust Lever Release System: For absolute safety during a mains blackout, the system includes a reinforced key-operated manual release mechanism (A4364), allowing operators to manually disengage the high-torque gear layout and push the massive gate leaves open freely.

Technical Specifications

The Operational Golden Rule: As your gate leaf gets longer, the maximum weight it can safely handle decreases due to leverage. For example, while the PM6 can handle a 4-meter gate at 1,000 kg, at its maximum 7-meter length, the weight limit drops to 550 kg.

Standard Kit Box Contents

1. 1 or 2 x FROG-PM4 / PM6 230V Gearmotors: High-torque electromechanical units with built-in adjustable mechanical end stops.

2. 1 or 2 x Frog-PC Foundation Boxes: Heavy-gauge steel protective casings with cataphoresis treatment.

3. 1 x ZM3EP Advanced Command Panel: Features an LCD programming screen and automated safety circuit self-testing.

4. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver card.

5. 1 x Pair of DIR20 Safety Photocells: Upgraded, surface-mounted synchronized infrared safety beams with an extended 20-meter range.

6. 2 x TOP SPORT (TOP44RBN) High-Security Transmitters: Sleek, carbon-fiber textured 4-button rolling code remotes running on a secure 433.92 MHz link.

7. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass structural interference and maximize remote operational range.

CAME Frog Plus – Pair of Gates Kit

CAME Frog Plus – Single Gate Kit

The high-inertia system is optimized for heavy wrought-iron or solid-clad timber gates measuring up to 3.5 meters in length or up to 800 kg per leaf, providing a massive 320 Nm of starting torque within a fully waterproof IP67-rated submersible enclosure.

Core Engineering & Mechanical Design

• Invisible Surface Aesthetic: The electromechanical gearmotors drop completely out of sight beneath the driveway line, leaving only a heavy-duty steel drive plate visible flush with the paving stones.

• High-Inertia Raw Torque: Powered by a line-voltage 230V single-phase motor, the system generates deep starting thrust to cleanly swing wide, wind-resistant or fully boarded timber leaves that might stall lower-voltage setups.

• IP67 Submersible Architecture: Built to survive harsh outdoor drainage environments, the motor casings are fully sealed against water and dust infiltration, allowing the system to continue running safely even if the foundation box temporarily fills with standing rainwater.

• Self-Locking Drive Security: The FROG-A utilizes an irreversible gear design that mechanically locks the gates securely in place when the motor stops, providing structural perimeter defence without strictly requiring a secondary physical latch.

Technical Specifications Matrix

Standard Kit Box Contents

1. 2 x FROG-A 230V Gearmotors: Heavy-duty, self-locking underground electromechanical drive units with integrated opening limits.

2. 2 x FROG-CF Foundation Boxes: Heavy-gauge protective steel foundation casings treated with an anti-rust cataphoresis coating.

3. 2 x A4364 Key Overrides: Custom steel mechanical release keys and lever linkages used to manually unlock and swing the gates freely during a power cut.

4. 1 x Advanced Control Board: Dual-leaf 230V command panel featuring an LCD programming display and automated safety circuit diagnostics.

5. 1 x AF43S Frequency Card: Plug-in 433.92 MHz radio frequency receiver module.

6. 1 x Pair of DIR10 Safety Photocells: Surface-mounted, synchronized infrared safety beams with a standard 10-meter range for clear driveway boundary defence.

7. 2 x TOP SPORT (TOP44RBN) Transmitters: Carbon-fibre textured 4-button rolling code remotes running on a secure 433.92 MHz link to block signal cloning.

8. 1 x TOP-A433N Tuned Antenna: External coaxial antenna to bypass structural boundary walls and maximize remote operational range.

CAME Frog – Pair Kit

CAME Frog – Single Kit

1. Core Engineering & Performance

• 230V AC Models (FROG-A / FROG-AE):

  • Best For: Standard residential estates where high power is needed to move heavy, solid-clad or wind-resistant gates.

  • Performance: Delivers massive, consistent starting torque to handle heavy iron or timber gates.

  • Key Variation: The AE model includes an electronic encoder for precise position tracking and smooth end-of-travel slowdowns.

• 24V DC Models (FROG-A24 / FROG-A24E):

  • Best For: Intensive-use properties (apartments, gated communities, or high-traffic homes).

  • Performance: Rated for continuous operation. Because they run on low voltage, they run cooler and include built-in obstacle detection.

  • Key Advantage: Can be fitted with an optional backup battery system (LB180), ensuring the gate remains operational during power outages.

2. Technical Specifications Matrix

3. Common Features Across Both Versions

• Invisible Installation: Both versions utilize the same FROG-CF foundation boxes, ensuring the motor is hidden completely beneath the driveway paving.

• IP67 Waterproofing: Every motor is factory-sealed to withstand flooding or water saturation within the underground foundation box.

• Manual Override: Both kits include the custom A4364 steel linkage key for manual release during emergencies.

• Structural Integrity: All motors are built with die-cast aluminium housings and cataphoresis-treated steel casings to prevent corrosion.

4. Standard Kit Box Contents

Regardless of the voltage chosen, the CAME Frog kits come as a “system-in-a-box”:

1. Motors: 1 or 2 x FROG gearmotors (230V or 24V).

2. Foundation: 1 or 2 x FROG-CF foundation boxes.

3. Override: 1 or 2 x Manual release mechanisms (A4364).

4. Control: 1 x Advanced control panel (ZLX230 for 230V / ZLX24 for 24V) with LCD screen.

5. Connectivity: 1 x AF43S receiver card.

6. Safety: 1 x Pair of DIR10 safety photocells.

7. Access: 2 x TOP SPORT (TOP44RBN) rolling-code remotes.

8. Range: 1 x TOP-A433N tuned antenna.

CAME FrogAE – Pair Kit

CAME FrogAE – Single Kit